Linear Bearings
        Linear Bearings is a low-cost production of linear motion system for unlimited travel used in conjunction with the cylindrical shaft. The ball bearing was due to point contact with the shaft, so the use of a small load. With minimal friction ball spin, giving them access to high-precision smooth movement.
        Linear bearings are widely used in electronic equipment, tensile testing machine and the digital three-dimensional coordinate measuring equipment and precision equipment, as well as multi-axis machine, punching machine, tool grinder, automatic gas cutting machine, printer, card sorting machine, food packing machines and other industrial machinery sliding components.
         Grease lubrication: linear bearings into the corrosion inside the oil, if using grease lubrication, the first organic solvent with kerosene or remove anti-corrosion oil, air-dried and then add the grease. Recommend the use of viscous marked as N0.2 lithium soap grease. Oil lubrication: If oil lubrication, you do not remove anti-corrosion oil, according to temperature changes can choose ISO viscosity grade VG15-100 lubricating oil. Shaft lubrication can not for the pipeline to, or from the outside of the hole to the bearing pedestal oil. As the ring will be scraped lubricating oil, oil lubrication does not apply without the hole with a seal bearing.
        Installation Note:
        Linear bearings into the bearing should be used when auxiliary work, to avoid a direct knock-end or O-ring should be used evenly into bearings, with a buffer board, and gently tap with penetration into the optical axis linear bearings, must be the center line of the shaft and bearing a straight line. If the insertion axis tilt, balls may fall off or cause cage variant, while the damage caused by straight-line bearing load should be applied evenly throughout the bearing, especially in bear instantaneous load should be used when two or more bearings. Linear bearings do not rotate load to bear, otherwise, can lead to accidents.